 |
- Optimized support of CATProduct. Assemblies larger than 500 megs and 2000 parts have been tested.
- More geometry type are transfered native to native. Torus,Offset surfaces, Draft and more.
- Use of SolidEdge API so that Draft, Pipes, Offset faces are recognized as such.
This increases the quality but also the usability.
- Support for CATIA V5 R16
- Ready for SolidEdge V18
- Ready for SolidEdge V17
- Three flags for supporting RSPara
- TrackFace supports a list of faces or selections
- Filters on models, filename cane be define with the REGEX syntax. This very powerfull syntax widely used in the Unix world allow very precise filters. To activate this feature set UseRegEx=true where the patterns are defined. This will apply to both Patterns and ExcludedPatterns
- Batch Translation is available to automate CATIAV5ToSolidEdge translations. Download the batch translator and follow installation guidelines.
- More CATIA entities are supported.
- Ready for SolidEdge V16
- New enhanced licensing system. We improved the system to support software locks, temporary licences and easier registration. The version requires a new unlock code. If you are under maintenance you should request it at support@radialsoft.com.
- Cancellation during the translation of the CATIA file is possible.
- Improvement of the progress dialog.
- Simplification of the registration with one single dialog.
- Improved handling of errors and exceptions.
- Does not require a CATIAV5 License.
- Powered by the RadialSoft OLEDM BREP engine RSGTModel, CATIAV5ToSolidEdge repairs and adjusts CATIAV5 geometry to obtain a useable and well-defined SolidEdge parts (Imported Solids).
- Protection scheme based on Ethernet board Mac Address, CAD Software SerialNumber or programmatic dongle.
- Options of CATIAV5ToSolidEdge are available through the menu and the toolbar. Appearance of the toolbar can be customized to rearrange the icons.
- During the reading of assemblies, the current component is closed before starting the conversion of the next component so that only the top-level assembly is open at the end of the conversion. This reduces memory usage and increase reliability.
- Parts are shared in assemblies when shared in CATIAV5.
- Easy and safe installation procedure based on self-extracting file.
- Only the top-level assembly is open at the end of the conversion.
- Online help available from inside SolidEdge.
- Support for multiples configurations for Options setting corresponding to your various types of CATIAV5 parts.
Various options let you decide what kind of entities are to be translated, in particular, hidden entities, isolated surfaces or MockUp Solids.The CATIAV5ToSolidEdge options settings are improved. Multiple configurations corresponding to each CATIA part type can be defined.
- Reading of Lines, Circles, Planes, Cylinders and Cones without any conversion.The performances of SolidEdge are improved with that kind of models. Also you can ask for the axis and other measures on the part.
- Assemblies are translated as SolidEdge assemblies and the components are located as defined in CATIA even if the transformation used in CATIA is a mirror.
- Read CATIAV5 files with extension CATPart
|
|
|
![[Home]](../images/navbar/home.gif){kind=small}
![[Products]](../images/navbar/productsp.gif){kind=small}
![[Company]](../images/navbar/company.gif){kind=small}
![[Contents]](../images/navbar/contents.gif){kind=small}
